ICON A5 - Page 807

ICON PARACHUTE SYSTEM (IPS) / EXTRACTION ROCKET 19-23
CHANGE C1 ICON A5 / MAINTENANCE MANUAL
CHAPTER 19
19.6.3 Inspection Instructions
19.6.3.1 Extraction Rocket Inspection
Use the following tasks to inspect the extraction rocket system.
TASK INFORMATION:
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
None
Aircraft System and Number
16—ICON Parachute System (IPS)
Consumables
None
TASK INSTRUCTIONS:
1. Ensure the detent pin with the “REMOVE BEFORE FLIGHT” flag is installed into the activation
handle.
2. Check the security of the Rocket to the Rocket Mount (both fasteners in the base must be
secure).
3. Ensure the carbon fiber Rocket Mount to which the Rocket Motor is attached is also secure (can
be confirmed by means of loading the mount by hand from underneath and observing any move-
ment indicative of loose Rocket Mount attach fasteners).
4. Check the security of the Rocket Mount to the Engine Bay Closeout (both fasteners in the base
must be tight).
VERIFICATION METHOD:
All extraction rocket mounting hardware is properly secured.