16-44 PROPULSION / ENGINE
ICON A5 / MAINTENANCE MANUAL CHANGE C2
3. Check the outside of the medium for broken wires, rips or tears.
4. Evaluate the air filter for cleanliness.
VERIFICATION METHOD:
If an element shows signs of wear and tear for the described items, the air filter must be replaced. See
Related Information.
In the event that the filter needs cleaning, see Related Information on cleaning the filter.
RELATED INFORMATION:
"Condition and 100-Hour Inspection—Engine and Propeller" on page 3-21
"Clean Engine Air Filter" on page 16-46
"Replace Engine Air Filter" on page 16-48
16.1.5.1.2 Air Filter Security Inspection
The following should be used to evaluate the air filter for security of connection.
TASK INFORMATION:
Type of Maintenance
Line
Level of Certification
Owner/Pilot
To Next Page
Loading...
