18-14 WING FOLD MECHANISM / WING FOLD MECHANISM GENERAL MAINTENANCE
ICON A5 / MAINTENANCE MANUAL CHANGE C0
4. Visually inspect all fastening hardware to ensure it is secure and to ensure there is no missing
hardware.
5. Confirm that the slide bushing assembly is still securely bonded in place and is not able to slide
or rotate.
6. Ensure the extension cap spring is still fastened to the slide tube.
7. Validate that the wire harness is in good working condition and is free of any wear and tear.
8. Replace the wing access panel.
VERIFICATION METHOD:
Completion of the steps above without any findings verifies proper security of the wing fold mecha-
nism.
To Next Page
Loading...
