EasyManuals Logo

Konica Minolta Image Controller IC-402 User Manual

Konica Minolta Image Controller IC-402
340 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #114 background imageLoading...
Page #114 background image
Scanning Documents
2
IC-402 2-79
Changing the File Name and Other Settings
Touch [E-Mail Setting] to change the following transmission information be-
fore sending the scan data. [Subject] and [Text] are available only with the
Scan to E-Mail operation.
The file name is assigned by combining the information below.
The conventions for assigning the file name are described below. The name
“SKMBT_C45004102315230” is explained below as an example.
Item Description
File Name The name of the saved file is displayed. This file name is
automatically displayed based on the settings specified in
“Administrator Setting”.
Up to 26 alphanumeric characters and symbols can be en-
tered.
Subject The information specified in Utility mode is automatically
displayed. Touch [Direct Input] to change the information.
Up to 64 characters can be entered.
Text The text specified in Utility mode is displayed. Touch [Direct
Input] to change the information.
Up to 64 characters can be entered.
Item Description
S The file name must begin with the letter “S”.
KMBT_<device_name> The name of the device that scanned the data. The factory de-
fault setting is “KMBT_<model_name>”. This name can be
changed by touching [Machine Name] under [Administrator/
Machine Setting] on the Administrator Setting screen. Enter
the name using up to 10 characters.
04102315230 Indicates the year (lower 2 digits), month, day, hour, and
minute when the data was scanned. The last digit is a se-
quence number when data is scanned consecutively in 1
minute.
_0001 Indicates the page number when multiple pages of data are
scanned. This number does not appear on the “File Name”
screen, but is automatically attached as part of the file name
when transmitted over the network. If a file name receive con-
dition is placed on the server such as during a Scan to FTP op-
eration, take this section of the name into account.
.JPG The extension of the specified data type. These characters do
not appear on the “File Name” screen, but is automatically at-
tached as part of the file name when transmitted over the net-
work.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Konica Minolta Image Controller IC-402 and is the answer not in the manual?

Konica Minolta Image Controller IC-402 Specifications

General IconGeneral
BrandKonica Minolta
ModelImage Controller IC-402
CategoryPrinter Accessories
LanguageEnglish

Related product manuals