Copier Network Functions
6
IC-402 6-24
SMTP Server Address
The SMTP server address used to send e-mail can be specified.
1 In the E-Mail TX (SMTP) screen 2/4, touch [Host Address].
The Host Address screen appears.
2 Touch [IP Address Input] or [Host Name Input].
– To specify the host address with the IP address, touch [IP Address
Input].
– To specify the host address with the host name, touch [Host Name
Input].
3 Enter the host address (IP address or host name (up to 255 charac-
ters)).
– To edit the values that you entered with “IP Address Input”, touch
[←] or [→] to move the cursor to the desired area, touch [Delete],
and enter the new value.
– To clear all values, press the [C] (clear) key.
4 Touch [OK].
The SMTP server address is set.
2
Note
To cancel changes to the setting, touch [Cancel].
If the host address exceeds 81 characters, touch [Details] to display the
Host Address Detail screen with the rest of the host addresses.
To Next Page
Loading...
