Other Network Scanning Settings
4
IC-402 4-4
Text
E-mail text can be registered. The settings that were registered when the
data was sent can be selected.
1 In the Scan screen, touch [4 Subject/Text (for E-mail)].
2 Touch [2 Text].
The E-Mail Text screen appears.
3 Touch [New].
The E-Mail Text Registration screen appears.
4 Touch [Text] and type in the text using the keyboard that appears on
the screen.
5 Touch [OK], and then touch [OK] in the next screen that appears.
The e-mail text is registered.
To Next Page
Loading...
