Konica Minolta Image Controller IC-402 - Changing the Administrator Password; Changing the Image Controllers Administrator Password; Changing the Copiers Administrator Password

Using PageScope Web Connection
7
IC-402 7-12
Changing the Administrator Password
Changing the Image Controller’s Administrator Password
1 Display image controller screen, and then display the setup screen for
the image controller.
2 Use [Change Password] to change the password.
!
Detail
For details on displaying the setup screen from the operation panel of the
image controller, refer to “Entering the Image Controller Setup Screen”
on page 5-4.
2
Note
When displaying the setup screen on the image controller, a password
may be requested. Contact the administrator of the image controller for
the password.
Changing the Copier’s Administrator Password
1 On the copier operation panel, press the [Utility/Counter] key.
2 Touch [3 Administrator Setting].
3 Input Administrator Code and touch [OK].
4 Touch [9 Security Setting].
5 Touch [1 Administrator Password].
6 Change the password.
2
Note
Contact the administrator of the copier for the administrator password.