Scanning Documents
2
IC-402 2-33
5 Load the document into the automatic document feeder or position it
on the original glass of the copier.
6 Press the [Start] key on the control panel.
The document is scanned, and the data is sent.
Selecting Group Addresses
“Group” refers to multiple destinations that are registered collectively. The
following procedure describes how to send data by selecting a group that
has been registered in advance.
For details on registering groups, refer to “Registering Group Destinations”
on page 3-16.
1 Press the [Scan] key on the control panel.
The Scan mode screen appears.
2 Touch [Group].
Touching the button for a group displays the list of members registered
in the group. Other destination addresses can be added using the ad-
dress book or through direct input.
Scan
To Next Page
Loading...
Need help?
General
