Specifying Network Scanning Settings
5
IC-402 5-8
Creating a Mailbox
Create a mailbox, a storage location of the image data.
1 Start PageScope Web Connection.
2 Click [Login (Fiery)].
3 Type in the administrator password, and then click the [Login].
4 Click the Box tab.
5 Click [Create] to open the Create Mailbox screen.
Enter settings for “Mailbox Name”, “Password”, and “Retype Pass-
word” and click [Apply].
2
Note
For details on accessing PageScope Web Connection, refer to “Access-
ing PageScope Web Connection” on page 7-3.
For details on logging on to Administrator mode (Fiery), refer to “Logging
On to the Image Controller’s Administrator Mode” on page 7-10.
“Admin”, “Operator”, and “Guest” are registered by default.
Up to 20 mailboxes can be created (including “Admin”, “Operator”, and
“Guest”).