Konica Minolta Image Controller IC-402 - SMB Destinations

Registering Destinations (Recipients) for Network Scanning
3
IC-402 3-9
SMB Destinations
SMB destinations can be registered.
1 In the Scan screen, touch [1 Address Book].
2 Touch [3 SMB].
The SMB screen appears.
3 Touch [New].
The Register SMB screen appears.
4 Touch [Name] and type in the name using the keyboard that appears
on the screen.
5 Touch [OK].
6 Touch [Host Address] and enter the host name or IP address.
– To enter the host name, touch [Host Name Input], and then type in
the host name using the keyboard that appears on the screen.