Before Using the Scan Functions
1
IC-402 1-9
2
Note
The destination can also be entered from the copier’s control panel be-
fore scanning, even if no destination has been registered in advance.
The destination can also be entered before scanning. This is called “di-
rect input”. For details, refer to “Entering the Addresses Directly” on
page 2-16.
!
Detail
For details on registering destinations and specifying settings, refer to the
sections listed below.
“Registering Abbreviated Destinations” on page 3-2
“Registering Group Destinations” on page 3-16
“Registering Program Destinations” on page 3-18
Registering Mailboxes (for Save in Mailbox of Image Controller Opera-
tions)
Mailboxes must first be registered on the hard disk of the image controller.
!
Detail
For details on registering mailboxes, refer to the following section.
“Specifying Settings for Save in Mailbox of Image Controller Operations”
on page 5-7.
To Next Page
Loading...
