Konica Minolta Image Controller IC-402 - Search Default Setting; To Specify the Detect Default Server Settings

Copier Network Functions
6
IC-402 6-19
6.6 Search Default Setting
You can specify the LDAP server that is to perform searches by priority from
the registered LDAP servers.
To specify the detect default server settings
1 In the Administrator Setting screen, touch [5 Network Setting]. (Refer to
page 1-17 for more details.)
2 In the Network Setting screen, touch [4 LDAP Setting].
3 In the LDAP Setting screen, touch [3 Default LDAP Server Setting].
The Default LDAP Server Setting screen appears.
4 Select the LDAP server that is to perform searches by priority.
5 Touch [OK].
2
Note
To cancel changes to the setting, touch [Cancel].
To quit specifying the Utility mode setting, touch [Exit] in the sub display
area or press the [Utility/Counter] key. Otherwise, cancel the Utility mode
by touching [Close] in each screen until the screen for the Copy, Fax,
Scan or Box mode appears.