Specifying Network Scanning Settings
5
IC-402 5-12
5.7 Setting the Error Notification Destination
You can carry out the following steps to specify the destination to notify er-
rors when mails transmitted using the Scan to E-mail or URL notification
function do not reach the destination address. However, if the mail is not
transmitted, the error is not notified.
To set the error notification destination
1 Show the setup screen from the image controller operation panel.
2 Select [Network Setup] — [Service Setup] — [E-mail Setup] and enter
the following settings.
2
Note
Administrator Email User Name@Administrator Email Domain Name is
the error notification destination.
Item Description
Administrator Email User
Name
Specify the E-mail user name of the controller administrator.
[Administrator Email Do-
main Name]
Specify the mail server domain name to which the administrator be-
longs.
To Next Page
Loading...
Need help?
General
