Konica Minolta Image Controller IC-402 - Authentication

Copier Network Functions
6
IC-402 6-56
Authentication
Specify whether to use authentication for access from other systems that
use OpenAPI. (Default setting: OFF)
1 In the Administrator Setting screen, touch [8 System Connection]. (Re-
fer to page 1-17 for more details.)
2 In the System Connection screen, touch [1 OpenAPI Setting].
3 In the OpenAPI Setting screen, touch [Authentication].
The OpenAPI Setting screen appears.
4 Touch the desired key under “Authentication”.
– If “ON” is selected, proceed to step 5 and enter the login name and
password.
– If “OFF” is selected, proceed to step 9.
5 Touch [Login Name].
6 Enter the login name (up to 8 characters), and then touch [OK].
The login name is set.
7 Touch [Password].