Konica Minolta Image Controller IC-402 - Available Scanning Functions

Before Using the Scan Functions
1
IC-402 1-3
1.2 Available Scanning Functions
“Scanning” refers to the operation of reading the image of a document fed
through the automatic document feeder or placed on the original glass of the
copier. The scanning functions can be used to send scanned data in an e-
mail message over a network or upload the data to a file server.
Sending the Scanned Data in an E-Mail Message
The scanned data can be sent to a specified e-mail address. The destination
is specified from the touch panel of this copier, and the scanned data is sent
as an e-mail attachment.
For details, refer to “Sending Data in an E-Mail Message (Scan to E-Mail)” on
page 2-6.
Copier
E-mail and scan data
E-mail reception
SMTP server POP server
Internet
Original
Image controller