Registering Destinations (Recipients) for Network Scanning
3
IC-402 3-5
FTP Destinations
FTP destinations can be registered.
1 In the Scan screen, touch [1 Address Book].
2 Touch [2 FTP].
The FTP screen appears.
3 Touch [New].
The Register FTP screen appears.
4 Touch [Name] and type in the name using the keyboard that appears
on the screen.
5 Touch [OK].
6 Touch [Host Address].
– Enter the host name or IP address.
– To enter the host name, check that [Host Name Input] is selected,
and then type in the host name using the keyboard that appears on
the screen.
To Next Page
Loading...
