Print Job Management
8
IC-402 8-16
Printing
1 Press the [Utility/Counter] key in the copier control panel.
2 Touch [6 Banner Printing].
3 Touch [ON], and then touch [OK].
4 Follow the instructions in the screen to reposition the finisher.
– On the finisher, load the banner paper that can be used on the pa-
per transport.
– If the finisher is not installed, continue with step 5.
5 Select a job to be printed from the computer, and then click “Print” on
the “File” menu.
6 Specify the desired settings, and then click the [OK] button.
7 Open the bypass tray.
To Next Page
Loading...
