Konica Minolta Image Controller IC-402 - Setting Procedure

Print Job Management
8
IC-402 8-14
Setting procedure
1 Click [Properties] in the Print dialog box to display the printer driver
Printing Preferences dialog box.
2 Click the Fiery Printing tab.
3 From the “Paper Source” drop-down list, select “PostScript Custom
Page Size” from the “Document Size” list.
4 From the “Paper Source” list, select the bypass tray.
5 From the “Paper Type” list, select “Thick 1” or “Thick 2”.
6 Click the Paper/Quality tab, and then click [Advanced].