Before Using the Scan Functions
1
IC-402 1-10
1.4 Settings for Scanning
Specifying the Scan Settings
The following scan settings can be specifying when scanning a document.
These settings are specified from the touch panel of the copier.
!
Detail
For details on the scan settings, refer to “Specifying the Scan Settings”
on page 2-52.
An annotation user box cannot be selected if the image controller is in-
stalled. For details on the Box functions, refer to “Copier Box Functions”
on page 1-7.
Specifying the Destination
Specify the destination (recipient) for the scan data. If the destination has
been registered in advance, select a destination from those that are already
registered. If the destination has not been registered, specify the destination
through direct input.
Item Description
File Type Sets the file type to be saved.
Resolution Sets the scan resolution.
Simplex/Duplex Selects whether to scan one side of the document or both sides.
Color Sets the color of the scanned document.
Scan Size Sets the size to be scanned.
Brightness Adjusts the brightness of the document.
Background Removal Adjusts the density of the background (blank areas) of the docu-
ment.
Original Setting Specifies the type and characteristics of the loaded document.
Application Provides functions for adjusting the print image, for example, for
scanning books and for erasing the surrounding area.
Separate Scan The scan operation can be divided into several sessions when all
pages of a document cannot be loaded into the automatic docu-
ment feeder or when placing the document on the original glass. In
addition, the documents can be scanned separately according to
their type, such as when single-sided documents are mixed with
double-sided documents.
File Name Changes the file name to be saved.
To Next Page
Loading...
Need help?
General
