Other Network Scanning Settings
4
IC-402 4-3
5 Touch [OK], and then touch [OK] in the next screen that appears.
The E-Mail subject is registered.
2
Note
The registration cannot be completed unless a setting is specified for
“Subject”.
To cancel changes to the setting, touch [Cancel].
To quit specifying the Utility mode setting, touch [Exit] in the sub display
area or press the [Utility/Counter] key. Otherwise, cancel the Utility mode
by touching [Close] in each screen until the screen for the Copy, Fax,
Scan or Box mode appears.
!
Detail
For the procedure to enter characters, refer to “Entering Text” on
page 9-2.
To Next Page
Loading...
