Konica Minolta Image Controller IC-402 - Page 136

Registering Destinations (Recipients) for Network Scanning
3
IC-402 3-17
6 Touch [Close].
– The registration cannot be completed unless a setting is specified
for “Remote Destination”.
7 Touch [OK].
The group destination is registered.
2
Note
To cancel changes to the setting, touch [Cancel].
To quit specifying the Utility mode setting, touch [Exit] in the sub display
area or press the [Utility/Counter] key. Otherwise, cancel the Utility mode
by touching [Close] in each screen until the screen for the Copy, Fax,
Scan or Box mode appears.
!
Detail
For the procedure to enter characters, refer to “Entering Text” on
page 9-2.