Copier Network Functions
6
IC-402 6-27
6 Type in the password (up to 15 characters).
7 Touch [OK].
– To cancel changes to the setting, touch [Cancel].
The password is set, and the SMTP Authentication screen appears
again.
8 In the SMTP Authentication screen, touch [Domain Name].
The Domain Name screen appears.
9 Type in the domain name (up to 255 characters).
10 Touch [OK].
– To cancel changes to the setting, touch [Cancel].
The domain name is set, and the SMTP Authentication screen appears
again.
11 Touch [Close].
The SMTP Detail screen appears again.
!
Detail
For the procedure to enter characters, refer to “Entering Text” on
page 9-2.
To Next Page
Loading...
Need help?
General
