Konica Minolta Image Controller IC-402 - Page 259

Using PageScope Web Connection
7
IC-402 7-30
2
Note
In order to specify an FTP destination as a host name, the DNS setting
must have been specified in the image controller’s setup screen. In the
setup screen for the image controller, select [Network Setup] – [Protocol
Setup] – [TCP/IP Setup] – [DNS Setup] to specify the setting.
2
Note
Correctly type in the mailbox name using uppercase and lowercase let-
ters.
Multiple destinations registered in the abbreviated destination list can be
registered as a program.
Center Erase Specify the width of the center of the document spread that is
to be erased when “Book Scanning” is set to “ON” and “Book
Spread” is selected beside “Method”.
Bind Destination Specify the binding position when “Book Scanning” is set to
“ON” and “Book Separation” is selected beside “Method”.
Erase Specify the width of the perimeter of the document to be
erased.
Item Description