Scanning Documents
2
IC-402 2-13
– Touch [Detail Search], and then type in the name of the destination
or part of the address to search for the corresponding address.
– Touch [LDAP Search] to search the addresses registered on the
LDAP server for the address that corresponds to the specified con-
ditions.
?
Why is [LDAP Search] not displayed on the Address Book tab?
% If the [Manual Destination Input] on the Security Details screen (dis-
played by touching [9 Security Setting] on the Administrator Setting
screen) is set to [Restrict], [LDAP Search] does not appear on the
Address Book tab. For details on LDAP searches, refer to “Perform-
ing an LDAP Search” on page 2-15.
?
To perform LDAP searches, what settings are required?
% Administrator settings such as the LDAP sever setting are required.
For details, refer to “Performing an LDAP Search” on page 2-15.
3 Touch the button for a destination to select it.
The selected buttons are highlighted, and the selected destinations are
listed under “Broadcast Destinations”. Other destination addresses
can be added through direct input.
To Next Page
Loading...
