Scanning Documents
2
IC-402 2-20
1 Press the [Scan] key on the control panel.
The Scan mode screen appears.
2 Touch [Program].
The selected destinations are listed under “Broadcast Destinations”.
Only the destinations that can be specified are displayed. For example,
fax destinations are not displayed.
3 Touch [Scan Settings] to check the specified scan settings. The set-
tings that appear in the main Scan mode screen can be specified in ad-
vance for each program. For details, refer to “Registering Program
Destinations” on page 3-18.
Scan
To Next Page
Loading...
