Diagnostic aids 3-27
5026
PPDS Emulation
Activates or deactivates (default) the Personal Printer Data Stream (PPDS) emulation language. This menu item
only appears if the PPDS interpreter is available.
Download Emuls
This menu item allows the system support person turn the download emulator off temporarily. This menu item
only appears if at least one download emulator is installed.
The only selection is Disable. The printer automatically re-enables all download emulators after two instances of
a power-on reset for the printer. To re-enable these emulators, a user would perform another power-on reset
after exiting the Config Menu.
Demo Mode
This menu item allows marketing personnel or merchandisers demonstrate the printer to potential customers by
printing the demo page.
Selections include Deactivate (default) and Activate. Select Deactivate to turn Demo Mode off; or select
Activate to turn Demo Mode on.
Factory Defaults
This menu item resets the majority of printer values back to their factory default settings.
Warning: This selection cannot be reversed, so this operation should only be used as a last resort to fix any
printer problem.
When factory default settings are restored:
• All downloaded resources (fonts, macros, symbol sets) in the printer memory (RAM) are deleted.
• All menu settings return to the factory default setting except:
– The Display Language setting in the “Setup” Menu.
– All settings in the Parallel Menu, Serial Menu, Network Menu, Infrared Menu, LocalTalk Menu, and
USB Menu.
Selections are Restore Base and Restore STD NET. The Restore Network value only appears on printer
models that have integrated network support.
Restoring Factory Defaults appears on the operator panel while factory defaults are restored.
Energy Conserve
This menu item affects the values that appear in the Power Saver menu on the operator panel. Energy
Conserve only appears when the Power Saver feature is disabled.
Select Off in Energy Conserve to add a menu item to the Power Saver called Disabled. Energy Conserve does
not disable Power Saver, it only allows the users to select Disable. When On (default) is selected in the Energy
Conserve menu Disabled does not appear on as a choice in the Power Saver menu. Power Saver cannot be
disabled from the user‘s operator menu.
To Next Page
Loading...
Need help?
General
