Lexmark C734dn - Page 370

4-148 Service Manual
5026
Go Back
Previous
Next
Left Margin
1. Adjust the left margin until the points of the left alignment marks touch the edge of the page.
• Increasing the value ( ) moves the bottom alignment marks up on the page.
• Decreasing the value ( ) moves the bottom alignment marks down on the page.
2. Press Select ( ) to save the value.
3. Print the Quick Test page, and check the left alignment marks each time until you are satisfied.
Right Margin
1. Adjust the right margin until the points of the left alignment marks touch the edge of the page.
• Increasing the value ( ) moves the bottom alignment marks up on the page.
• Decreasing the value ( ) moves the bottom alignment marks down on the page.
2. Press Select ( ) to save the value.
3. Print the Quick Test page, and check the results. Repeat if necessary.
4. When the registration is complete, proceed to the color alignment.
Alignment (cyan, yellow, and magenta)
1.
Select Back ( ) until you reach the top menu.
2. Select ALIGNMENT MENU, and press Select ().
3. Select Cyan, and press Select ().
4. Select Top Margin, and press Select ().
5. Use and to set Top Margin to zero, and press Select ( ) to save the value.
6. Do the same for Left Margin, Right Margin, Bottom Margin, Skew, and Bow.
It is important to set all the values to zero before starting.