Repair information 4-161
5026
It is difficult to press both locking tabs at the same time. Using a spring hook, press the locking tab (A), and
disengage the sensor on that side. Press the other locking tab (B), and remove the sensor.
Note: Use a slight pressure on the cable to keep the first locking tab from relatching, while you disconnect
the second locking tab.
For the lower two sensors:
Using a spring hook, press the locking tab (C), and disengage the sensor on that side. Press the other
locking tab (D), and remove the sensor.
To Next Page
Loading...
Need help?
General
