Lexmark CX310 Service Manual

Message Action
Replace all originals if restarting job.
Try one or more of the following:
• Touch Cancel job to clear the message and cancel the scan
job.
• Touch Scan from automatic feeder to continue scanning
from the ADF immediately after the last successful scan
job.
• Touch Scan from flatbed to continue scanning from the
scanner immediately after the last successful scan job.
• Touch Finish job without further scanning to end the last
successful scan job.
• Touch Restart job to restart the scan job with the same
settings from the previous scan job.
Replace [color] cartridge, 0 estimated
pages remain [88.xy]
Replace the indicated toner cartridge to clear the message and
continue printing. For more information, see the instruction
sheet that came with the supply.
Note: If you do not have a replacement cartridge, then see
the “Ordering supplies” section of the User’s Guide or visit
http://support.lexmark.com.
Replace [color] cartridge, printer
region mismatch [42.xy]
Install a toner cartridge that matches the region number of
the printer. x indicates the value of the printer region. y
indicates the value of the cartridge region. x and y can have
the following values:
• 0: Global
• 1: United States, Canada
• 2: European Union (EU), European Economic Area (EEA),
Switzerland
• 8: Rest of the world
• 9: Invalid
Notes:
• The x and y values are the .xy of the error code shown
on the printer control panel.
• The x and y values must match for printing to continue.
Replace [type] imaging kit, 0 estimated
pages remain [84.xy]
Replace the indicated imaging kit to clear the message and
continue printing. For more information, see the instruction
sheet that came with the supply.
Note: If you do not have a replacement imaging kit, then
see the "Ordering supplies" section of the User’s Guide or
visit
http://support.lexmark.com.
Replace defective [color] cartridge
[31.xy]
Replace the defective toner cartridge to clear the message.
For more information, see the instruction sheet that came
with the supply.
Note: If you do not have a replacement toner cartridge,
then see the "Ordering supplies" section of the User’s Guide
or visit
http://support.lexmark.com.
7527
Diagnostic information
83

Lexmark CX310 Specifications

General

Print Technology	Laser
Scan Technology	CIS
Scan Resolution	Up to 600 x 600 dpi
Duplex Printing	Manual
Display	2.4-inch color LCD
Processor Speed	800 MHz
Standard Memory	256 MB
Fax Speed	33.6 Kbps
Operating System Compatibility	Windows, Mac OS, Linux
Print Resolution	Up to 600 x 600 dpi
Connectivity	USB, Ethernet
Standard Paper Input	250 sheets
Scanner Type	Flatbed, ADF
Fax Resolution	300 x 300 dpi
Paper Capacity	250 sheets
Network Connectivity	Ethernet
Copy Speed	Up to 22 cpm (black), Up to 18 cpm (color)