Lexmark CX833 - Page 284

Menu item Submenu item Settings Description
Date and Time Configure Current Date and Time
Manually Set Date and
Time
Date Format
(MM‑DD‑YYYY*)
Time Format (12 hour
A.M./P.M.*)
Time Zone
DST (GMT) Oset
DST Start
DST End
DST Oset
Configure the printer date and
time and network time protocol.
Notes:
• MM‑DD‑YYYY is the U.S.
factory default setting.
DD‑MM‑YYYY is the
international factory
default setting.
• UTC (GMT) Oset, DST
Start, DST End, and DST
Oset
appear only when
Time Zone is set to (UTC
+user) Custom.
• Key ID and Password
appear only when Enable
Authentication is set to
MD5 key.
Network Time Protocol Enable NTP (On*)
NTP Server
Enable Authentication
(None*)
Key ID
Password
Paper Sizes N/A U.S.*
Metric
Specify the unit of
measurement for paper sizes.
Note: The country or region
selected in the initial setup
wizard determines the initial
paper size setting.
Screen Brightness N/A 20–100% (100*) Adjust the brightness of the
display.
Flash Drive Access N/A Disabled
Enabled*
Enable access to the flash drive
function of the printer.
Allow Background
Removal
N/A O
On*
Specify whether background
removal is allowed.
Allow Custom Job scans N/A O
On*
Specify whether the Custom
Job Scanning setting appears
for copy, scan, and fax.
Note: This menu item appears
only when a storage drive is
installed.
One Page Flatbed
Scanning
N/A O*
On
Set the printer to scan any type
of job involving the scanner
glass as a single page.
Note: The printer returns to the
home screen after performing
a single flatbed scan instead of
displaying prompts.
Note: An asterisk (*) next to a value indicates the factory default setting.
Printer menus 284