Menu item Submenu item Settings Description
Printer Emulations PPDS Emulation O*
On
Set the printer to recognize and
use the PPDS data stream.
PS Emulation O
On*
Set the printer to recognize and
use the PS data stream.
Enable Formsmerge O*
On
Activate Forms Merge.
Notes:
• The Formsmerge license
must be installed.
• A user flash memory must
be installed.
Enable Prescribe O*
On
Activate the PRESCRIBE printer
language.
Note: The PRESCRIBE license
must be installed.
Emulator Security Page Timeout (60*) Set the page timeout during
emulation.
Reset Emulator After Job
(O*)
Reset the emulator after a print
job.
Disable Printer Message
Access (On*)
Determine whether the
emulator can access the initial
printer setup or not.
Fax Configuration Fax Low Power Support Disable Sleep
Permit Sleep
Auto*
Determine if the printer
supports the fax portion of the
low power architecture.
Fax Storage Location Disk*
NAND
Set the storage location for all
faxes.
Note: This menu item appears
only when a storage drive is
installed.
Note: An asterisk (*) next to a value indicates the factory default setting.
Printer menus 296
To Next Page
Loading...
