Menu item Submenu item Settings Description
Admin Controls Automatic Redial 0–9 (5*) Specify the number of attempts that the printer
redials before it cancels sending the fax to a
specified
destination.
Redial Frequency 1–200 minutes (3*) Increase the time between redial attempts to
increase the chance of sending fax successfully.
Enable ECM On*
O
Activate Error Correction Mode (ECM) for fax
jobs.
Note: ECM detects and corrects errors in the
fax transmission process caused by telephone
line noise and poor signal strength.
Enable Fax Scans On*
O
Create faxes using the printer scanner.
Driver to Fax On*
O
Allow the print driver to send fax.
Allow Save as
Shortcut
On*
O
Save fax numbers as shortcuts on the printer.
Max Speed 33600*
14400
9600
4800
2400
Set the maximum speed for sending fax.
Custom Job
Scanning
O*
On
Turn on scanning of custom jobs by default.
Scan Preview O*
On
Show a preview of the scan on the display.
Adjust ADF Skew O
On*
Correct slight skew in the scanned image.
Enable Color Fax
Scans
O by Default*
On by Default
Never Use
Always Use
Enable color scans for fax.
Auto Convert Color
Faxes to Mono
Faxes
On*
O
Convert all outgoing color faxes to black and
white.
Confirm Fax
Number
O*
On
Ask the user to confirm the fax number.
Dial Prefix The setting is
user‑defined.
Set a dialing prefix.
Dialing Prefix Rules The setting is
user‑defined.
Establish a dialing prefix rule.
Note: An asterisk (*) next to a value indicates the factory default setting.
Printer menus 324
To Next Page
Loading...
