Lexmark CX833 - Page 325

Menu item Submenu item Settings Description
Fax Receive
Settings
Fax Job Waiting None*
Ton er
Toner and Supplies
Remove fax jobs that request specific
unavailable resources from the print queue.
Rings to Answer 1–25 (3*) Set the number of rings required before the
printer answers the incoming calls.
Auto Reduction On*
O
Scale incoming fax to fit on the page.
Paper Source Tray [x]
Auto*
Set the paper source for printing incoming fax.
Sides On
O*
Print on both sides of the paper.
Separator Sheets None*
Before Job
After Job
Specify whether to insert blank separator sheets
when printing.
Separator Sheet
Source
Tray [x] (1*) Specify the paper source for the separator sheet.
Output Bin Standard Bin Specify the output bin for received faxes.
Fax Footer On
O*
Print the transmission information at the bottom
of each page from a received fax.
Fax Footer Time
Stamp
Receive*
Print
Print the time stamp at the bottom of each page
from a received fax.
Holding Faxes Held Fax Mode
(O*)
Hold received faxes from printing until they are
released.
Fax Holding
Schedule
Assign a schedule for holding faxes.
Note: This menu item appears only if Held Fax
Mode is set to Scheduled.
Note: An asterisk (*) next to a value indicates the factory default setting.
Printer menus 325