Lexmark CX833 - Page 343

Menu item Submenu item Settings Description
Blank Pages Blank Page Removal Do Not Remove*
Remove
Remove the blank pages from the original
document.
Blank Page
Sensitivity
1–9 (5*) Set the sensitivity of scans in relation to blank
pages in the original document.
Note: An asterisk (*) next to a value indicates the factory default setting.
Admin Controls
Menu item Settings Description
Tex t Def ault 5–95 (75*) Set the quality of text on the scanned image.
Tex t/Pho to De fault 5–95 (75*) Set the quality of text and photo on the
scanned image.
Photo Default 5–95 (50*) Set the quality of photo on the scanned image.
Use Multi‑Page
TIFF
On*
O
Enable scanning of multiple TIFF images in
one TIFF file.
TIFF Compression LZW*
JPEG
Specify the compression type for TIFF files.
Transmission Log Print Log*
Do Not Print Log
Print Only For Error
Print a transmission log for FTP scans.
Log Paper Source Tray [x] (1*)
Multipurpose Feeder
Specify the paper source for printing FTP logs.
Custom Job
Scanning
O*
On
Set the printer to scan the first set of original
documents using the specified settings, and
then scan the next set with the same or
dierent settings.
Note: This menu item appears only when a
storage drive is installed.
Scan Preview O
On*
Show a preview of the original document.
Note: This menu item appears only when a
storage drive is installed.
Allow Save as
Shortcut
O
On*
Save an FTP address as a shortcut.
Note: An asterisk (*) next to a value indicates the factory default setting.
Printer menus 343