Lexmark CX833 - Page 342

Menu item Submenu item Settings Description
Color Dropout Color Dropout None*
Red
Green
Blue
Specify which color to drop during scanning,
and adjust the dropout setting for that color.
Default Red
Threshold
0–255 (128*)
Default Green
Threshold
0–255 (128*)
Default Blue
Threshold
0–255 (128*)
Auto Color Detect Color Sensitivity 1–9 (5*) Configure the auto color detection setting.
Area Sensitivity 1–9 (5*)
E‑mail Bit Depth 1 bit*
8 bit
Minimum Scan
Resolution
75 dpi
150 dpi
200 dpi
300 dpi*
JPEG Quality N/A Best for content*
5–95
Set the JPEG quality of the scanned image.
Contrast N/A Best for content*
0–5
Specify the contrast for the scanned image.
Background Removal Background
Detection
Content‑based*
Fixed
Level ‑4 to 4 (0*)
Remove the background color or image noise
from the original document.
Mirror Image N/A O*
On
Create a mirror image of the original document.
Negative Image N/A O*
On
Create a negative image of the original
document.
Shadow Detail N/A ‑4 to 4 (0*) Adjust the shadow detail in the scanned image.
Scan Edge to Edge N/A O*
On
Scan the original document from edge to edge.
Sharpness N/A 1–5 (3*) Adjust the sharpness in the scanned image.
Tem perat ure N/A ‑4 to 4 (0*) Generate a bluer or redder output of the original
document.
Note: An asterisk (*) next to a value indicates the factory default setting.
Printer menus 342