Lexmark CX833 - Page 450

Error codes Error message Solution
75.11 Secure Element update failed. Do either of the following:
• Try the update again.
• Cancel the update.
Note: The printer may erase all
existing
certificates
and storage drive
contents.
75.12 Secure Element update
incomplete.
Do either of the following:
• Restart the printer.
Note: Wait for 10 seconds to complete
the update.
• Cancel the update.
Note: The printer may erase all
existing
certificates
and storage drive
contents.
80.01, 80.09 Maintenance kit nearly low. Select Continue to clear the message.
80.11, 80.19 Maintenance kit low.
80.21, 80.29 Maintenance kit very low.
80.31 Replace maintenance kit to
continue printing.
For more information, see
“Replacing the
fuser” on page 404.
80.31 Replace maintenance kit,
recommended life exceeded.
81.11 1500-sheet tray roller kit
low.
Select Continue to clear the message.
81.31 Replace 1500-sheet tray roller
kit, recommended life exceeded.
For more information, contact
customer
support.
82.00, 82.02, 82.09 Waste toner bottle is nearly
full.
For more information, see
“Replacing the
waste toner bottle” on page 403.
82.3, 82.32, 82.33, 82.39 Replace the waste toner
bottle.
83.1y Transfer module low. Select Continue to clear the message.
83.3y Replace transfer module,
recommended life exceeded.
For more information, contact
customer
support.
83.4y Replace transfer module.
83.20 Staple cartridge low. Select Continue to clear the message.
83.20 Staple S2 inner low.
83.20 Staple S2 outer low.
Troubleshoot a problem 450