Lexmark MX71X - Page 46

– ADF left hinge removal
– ADF pick roller removal
– ADF right hinge removal
– Control panel front cover removal
– Interrupt with flag sensor (ADF 2nd scan) removal
– Interrupt with flag sensor (ADF media exit) removal
– Flatbed scanner assembly removal
– Laser printhead removal
– Control panel latch removal
– Assembly 2: Covers (MX81x)
– Assembly 8: Frame Assembly
– Assembly 9: Control panel (MX71x)
– Assembly 10: Control panel 10inch display (MX81x)
– Assembly 11: Paper tray
– Assembly 15: ADF electronics
– Assembly 16: Flatbed scanner (MX710 and MX711)
– Assembly 17: Flatbed scanner (MX810, MX811 and MX812)
– Assembly 20: 250-sheet tray option (MX710 and MX711)
– Assembly 21: 550-sheet tray option (MX710 and MX711)
– Assembly 22: 550-sheet tray option (MX810, MX811, MX812)
– Assembly 24: High capacity input tray option 3 (MX810, MX811, MX812)
– Assembly 34: Miscellaneous
• Added the following topics:
– Duplex removal (MX71x)
– Duplex removal (MX81x)
– Media size actuator removal
– Sensor (ADF elevator tray home position) removal
– Sensor (ADF lower door interlock) removal
– Sensor (ADF top door interlock) removal
– Sensor (ADF gap detect) removal
– Upper redrive motor removal
– Assembly 7: Duplex in parts catalog
7463
Preface
46