Lexmark MX71X - Page 45

December 20, 2012
• Changed "Adjusting skew" to "ADF skew adjustments"
• Updated the following topics:
– Sensor (input) never or late arriving jam service check
– 250/550-sheet media tray option jam service check
– HCIT jam service check
– ADF skew adjustment (front side)
– ADF skew adjustment (back side)
– ADF assembly removal
– ADF front side drive parts pack removal
– ADF left hinge removal
– ADF pick roller removal
– ADF right hinge removal
– Control panel front cover removal
– Interrupt with flag sensor (ADF 2nd scan) removal
– Interrupt with flag sensor (ADF media exit) removal
– Flatbed scanner assembly removal
– Laser printhead removal
– Control panel latch removal
– Assembly 2: Covers (MX81x)
– Assembly 8: Frame Assembly
– Assembly 9: Control panel (MX71x)
– Assembly 10: Control panel 10inch display (MX81x)
– Assembly 11: Paper tray
– Assembly 15: ADF electronics
– Assembly 16: Flatbed scanner (MX710 and MX711)
– Assembly 17: Flatbed scanner (MX810, MX811 and MX812)
– Assembly 20: 250-sheet tray option (MX710 and MX711)
– Assembly 21: 550-sheet tray option (MX710 and MX711)
– Assembly 22: 550-sheet tray option (MX810, MX811, MX812)
– Assembly 24: High capacity input tray option 3 (MX810, MX811, MX812)
– Assembly 34: Miscellaneous
• Updated the following topics:
– Sensor (input) never or late arriving jam service check
– 250/550-sheet media tray option jam service check
– HCIT jam service check
– ADF skew adjustment (front side)
– ADF skew adjustment (back side)
– ADF assembly removal
– ADF front side drive parts pack removal
7463
Preface
45