214683 387 Revision A
S
Float spring tensioners; refer to Every 100
Hours, page 393
S
Reel drive chain; refer to Every 100 Hours,
page 393
S
Upper cross auger right bearing; refer to
Every 100 Hours, page 393
200 Hours or Annually (Whichever Occurs First)
ü
Draper roller bearings; refer to 5.14.6
Header Draper Roller Maintenance, page
494
250 Hours or Annually (Whichever Occurs First)
ü
Draper seal; refer to 5.14.5 Adjusting Deck
Height, page 492
S
Reel drive U-joint; refer to Every 250
Hours, page 396
S
Bell crank linkage; refer to 3.9 Leveling the
Header, page 286
S
Transport axle pivot bushings; refer to
Every 250 Hours, page 396
▲
Hydraulic oil filter; refer to 5.4.4 Changing
Oil Filter, page 410
500 Hours or Annually (Whichever Occurs First)
ü
Draper seal; refer to 5.14.5 Adjusting Deck
Height, page 492
S
Reel shaft bearings; refer to Every 500
Hours, page 397
S
Stabilizer/slow speed transport wheel
bearings; refer to Every 500 Hours, page
397
ü
Header drive gearbox chain tension; refer
to 5.7.3 Adjusting Auger Drive Chain
Tension, page 423
1000 Hours or 3 Years (Whichever Occurs First)
▲
Knife drive box lubricant; refer to Changing
Oil in Knife Drive Box, page 461
▲
Header drive gearbox lubricant; refer to
Changing Oil in Header Drive Gearbox,
page 405
▲
Hydraulic oil; refer to 5.4.3 Changing Oil in
Hydraulic Reservoir, page 409
MAINTENANCE AND SERVICING
To Next Page
Loading...
