Mazda 6 2002 - Inspection During Removal, Disassembly; Arrangement of Parts; Cleaning of Parts; Reassembly

GI14
FUNDAMENTAL PROCEDURES
INSPECTION DURING REMOVAL, DISASSEMBLY
A6E201400004W08
• When removed, each part should be carefully
inspected for malfunction, deformation, damage,
and other problems.
End Of Sie
ARRANGEMENT OF PARTS
A6E201400004W09
• All disassembled parts should be carefully
arranged for reassembly.
• Be sure to separate or otherwise identify the parts
to be replaced from those that will be reused.
End Of Sie
CLEANING OF PARTS
A6E201400004W10
• All parts to be reused should be carefully and
thoroughly cleaned in the appropriate method.
Warning
•
••
• Using compressed air can cause dirt and
other particles to fly out causing injury to
the eyes. Wear protective eye wear
whenever using compressed air.
End Of Sie
REASSEMBLY
A6E201400004W11
• Standard values, such as torques and certain
adjustments, must be strictly observed in the
reassembly of all parts.
X3U000WAM
X3U000WAN
WGIWXX0030J
WGIWXX0031J