T48
INTERIOR LIGHTING SYSTEM
FRONT MAP LIGHT REMOVAL/INSTALLATION
A6E811451310W01
1. Disconnect the negative battery cable.
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
Front Map Light Removal Note
1. Insert a tape-wrapped flathead screwdriver into the gap between the headliner and the front map light.
2. Push the hooks to remove the front map light.
End Of Sie
FRONT MAP LIGHT INSPECTION
A6E811451310W02
1. Remove the front map light. (See T48 FRONT MAP LIGHT REMOVAL/INSTALLATION.)
2. Inspect for continuity between the front map light
terminals using an ohmmeter.
• If not as specified, replace the front map light.
End Of Sie
INTERIOR LIGHTING SYSTEM
1 Front map light (See T48 Front Map Light Removal
Note)
2 Connector
3Socket
4 Map light bulb
A6E8114W102
A6E8114W103
A6E8114W118
A6E8114W117
To Next Page
Loading...
