GI2
HOW TO USE THIS MANUAL
RANGE OF TOPICS
A6E201000001W01
• This manual contains procedures for performing all required service operations. The procedures are divided
into the following five basic operations:
Removal/Installation
Disassembly/Assembly
Replacement
Inspection
Adjustment
• Simple operations which can be performed easily just by looking at the vehicle (i.e., removal/installation of
parts, jacking, vehicle lifting, cleaning of parts and visual inspection) have been omitted.
End Of Sie
SERVICE PROCEDURE
A6E201000001W02
Inspection, adjustment
• Inspection and adjustment procedures are divided into steps. Important points regarding the location and
contents of the procedures are explained in detail and shown in the illustrations.
HOW TO USE THIS MANUAL
XME2010001
To Next Page
Loading...
