Mazda 6 2002 - Oil Cooler Disassembly;Assembly

AUTOMATIC TRANSAXLE
K41
K
2. Align the marks, and slide the oil hose onto the oil
pipe until it is fully seated as shown.
Note
• If reusing the hose, install the new hose
clamp exactly on the mark left by the
previous hose camp.Then apply force to the
hose clamp in the direction of the arrow in
order to fit the clamp in the place.
3. Install the new hose clamp onto the hose.
4. Verify that the hose clamp does not interfere with
any other components.
End Of Sie
OIL COOLER DISASSEMBLY/ASSEMBLY
A6E561419900W03
1. Disassemble in the order indicated in the table.
2. Assemble in the reverse order of disassembly.
.
A6E5614W071
A6E5614W072
1 Mount rubber
2 Radiator outer tank (in tank oil cooler)
(See K42 Radiator Outer Tank (In Tank Oil Cooler)
Removal Note.)
(See K42 Radiator Outer Tank (In Tank Oil Cooler)
Installation Note.)
3 O-ring
4 Washer
5 Drain plug
6 ATF cooler
7Radiator