Mazda 6 2002 - Bonnet Switch Inspection

THEFT-DETERRENT SYSTEM
T85
T
BONNET SWITCH INSPECTION
A6E812001084W01
Note
• Bonnet switch has a built-in bonnet lock.
1. Open the bonnet.
2. Disconnect the negative battery cable.
3. Remove the radiator grille.
4. Disconnect the bonnet switch connector.
5. Check the continuity between the bonnet switch
terminals A and B using an ohmmeter.
• If there is continuity, replace the bonnet
switch.
6. Lock the bonnet lock using a flat-head
screwdriver or equivalent as shown.
7. Check the no continuity between the bonnet
switch terminals A and B using an ohmmeter.
• If there is no continuity, replace the bonnet
switch.
Caution
•
••
• After the inspection, unlock the bonnet
lock. If closing the bonnet with the
bonnet lock locked, the bonnet lock and/
or bonnet striker may be broken.
End Of Sie
THEFT-DETERRENT SYSTEM
A6E8120W002
A6E8120W003