Mazda 6 2002 - Inner Handle Removal;Installation; Regulator Handle Removal; Regulator Handle Installation

S22
DOOR
INNER HANDLE REMOVAL/INSTALLATION
A6E771458330W01
1. Remove the front door trim.
2. Using a flathead screwdriver, press and hold the
hook in the direction indicated by arrow (1), and
pull the shaft in the direction indicated by arrow
(2), remove the shaft.
3. Pull off the inner handle, and remove the door
lock knob cable and inner handle cable.
4. Install in the reverse order of removal.
End Of Sie
REGULATOR HANDLE REMOVAL
A6E771458580W01
1. Remove the regulator handle clip using a rag as
shown.
End Of Sie
REGULATOR HANDLE INSTALLATION
A6E771458580W02
1. Install the clip in the regulator handle.
2. Close the door glass fully and push the regulator
handle on as shown.
End Of Sie
A6E7714W010
A6E7714W008
A6E7714W009