Mazda 6 2002 - Oil Pump; Oil Pump Removal;Installation

D10
OIL PUMP
OIL PUMP REMOVAL/INSTALLATION
A6E332214100W01
1. Disconnect the negative battery cable.
2. Drain the engine oil. (See D4 ENGINE OIL REPLACEMENT.)
3. Remove the oil pan. (See D8 OIL PAN REMOVAL/INSTALLATION.)
4. Remove in the order indicated in the table.
5. Install in the reverse order of removal.
6. Inspect the engine oil level. (See D4 ENGINE OIL INSPECTION.)
7. Start the engine and inspect for oil leakage.
• If the oil leaks, specify the faulty part and repair or replace it.
8. Inspect the oil pressure. (See D3 OIL PRESSURE INSPECTION.)
.
OIL PUMP
AME3322W001
1 Oil strainer
2 Oil pump chain guide
3 Oil pump chain tensioner
4 Oil pump chain tensioner spring
5 Oil pump chain
6 Oil pump sprocket
(See D11 Oil Pump Sprocket Removal /
Installation Note)
7 Oil pump