ENGINE SPEED SENSING POWER STEERING
N9
N
STEERING SHAFT INSPECTION
A6E661432100W01
1. Inspect the following.
(1) Column bearing for damage
(2) Steering shaft length
• Replace the steering shaft component as
necessary.
Length
211.6 mm {8.3 in}
2. Inspect the tilt and telescope operation
(1) Verify that the adjusting lever moves smoothly
from unlock position to lock position.
(2) Verify that the steering shaft is fixed firmly
when the adjusting lever is locked.
• Replace the steering shaft component as
necessary.
End Of Sie
A6E0612W022
A6E0612W023
To Next Page
Loading...
