Mazda Mazda6 - Page 413

MANUAL TRANSAXLE
J2–11
J2
12. Tighten the bolt E.
Tightening torque
E: 85.3—116.6 N·m
{8.70—11.88 kgf·m, 62.91—85.98 ft·lbf}
F,G,H: 66.6—93.1 N·m
{6.80—9.49 kgf·m, 49.2—68.6 ft·lbf}
No.1 Engine Mount Installation Note
1. Tighten the bolt A, then bolt B.
Tightening torque
93.1—116.6 N·m
{9.50—11.88 kgf·m, 68.66—85.98 ft·lbf}
2. Align the hole of the No.1 engine mount rubber with the crossmember.
3. Lightly tighten the bolt C, then tighen the bolt C.
Tightening torque
93.1—116.6 N·m
{9.50—11.88 kgf·m, 68.66—85.98 ft·lbf}
4. Remove the SST (49 E017 5A0).
End Of Sie
D
H
C
F
B
A
GE
A6E5212W024
TRANSAXLE
C
B
A
A6E5212W025