OUTLINE
M–3
M
4WD
Bold frames:New specifications
End Of Sie
Item
Specification
New Mazda6 (GY)(Wagon 4WD)
Engine L3
Transaxle ATX
Front axle Bearing type Angular ball bearing
Rear axle Bearing type Angular ball bearing
Front drive shaft
Joint type
Wheel side Bell joint
Differential side Tripod joint (With free ring)
Shaft diameter (mm {in}) 24.0 {0.94}
Joint shaft Shaft diameter (mm {in}) 29.0 {1.14}
Rear drive shaft
Joint type
Wheel side Bell joint
Differential side Double offset joint
Shaft diameter (mm {in}) 22.0 {0.87}
Rear and front wheel torque distribution unit Electronic control coupling
Rear differential
Reduction gear Hypoid gear
Differential gear Straight bevel gear
Ring gear size (Inches) 6.5
Final gear ratio 2.928
Gears:
Number of teeth
Drive pinion 14
Ring gear 41
Differential oil
Type
Grade API service GL-5
Viscosity
Above –18°C {0°F}: SAE 90
Below –18°C {0°F}: SAE 80
Amount
(Approximate quantity)
(L {US qt, lmp qt}) 1.0 {1.1, 0.9}
To Next Page