R–6
REAR SUSPENSION
Operation
During leveling operation
• During shock absorber expansion, the inlet check valve opens due to negative pressure created in the pump
chamber, and oil is drawn into the pump chamber from the low-pressure chamber. During shock absorber
contraction, oil pressure in the pump chamber forces the outlet check valve to open, and oil in the pump
chamber flows through the pump cylinder into the high-pressure chamber. Due to this expansion and
contraction while driving, rod reaction force increases, and the vehicle height returns to the designated load
level. Also, similar to a regular shock absorber, damping is performed while driving with the damping valve.
.
Leveling operation completed
• When the vehicle height returns to the designated
load level, the volume of oil in the high-pressure
chamber increases and the piston rises. This
causes the pump chamber and the high-pressure
chamber to be connected at the pump rod notch,
and the expansion or contraction is completed.
.
8
7
5
4
3
6
1
2
A6E74162002
1 Pump chamber
2 Outlet check valve
3 Inlet check valve
4 Low-pressure chamber
5 Damping valve
6 High-pressure chamber
7 Leveling operation (expansion)
8 Leveling operation (contraction)
1 Pump chamber
2Piston
3 Pump rod notch
4 High-pressure chamber
4
3
1
2
A6E74162003
To Next Page